TIRE AND WHEEL SYSTEM INSPECTION


  1. INSPECT TIRE


    1. Check the tires for wear and proper inflation pressure.

      Cold Tire Inflation Pressure
      Tire Size Engine Vehicle Speed Front Rear
      205/60R16 92V 1ZR/2ZR

      Driving at less than 160 km/h

      (100 mph)

      240 kPa (2.4 kgf/cm2, 35 psi)

      230 kPa (2.3 kgf/cm2, 33 psi)
      1AD

      250 kPa (2.5 kgf/cm2, 36 psi)

      230 kPa (2.3 kgf/cm2, 33 psi)
      1ZR/2ZR

      Driving at more than 160 km/h

      (100 mph)

      270 kPa (2.7 kgf/cm2, 40 psi)

      260 kPa (2.6 kgf/cm2, 38 psi)
      1AD

      280 kPa (2.8 kgf/cm2, 41 psi)

      260 kPa (2.6 kgf/cm2, 38 psi)
      215/55R17 94W 1ZR/2ZR

      Driving at less than 190 km/h

      (118 mph)

      240 kPa (2.4 kgf/cm2, 35 psi)

      230 kPa (2.3 kgf/cm2, 33 psi)
      1AD/2AD

      250 kPa (2.5 kgf/cm2, 36 psi)

      230 kPa (2.3 kgf/cm2, 33 psi)
      1ZR/2ZR

      Driving at more than 190 km/h

      (118 mph)

      270 kPa (2.7 kgf/cm2, 40 psi)

      260 kPa (2.6 kgf/cm2, 38 psi)
      1AD/2AD

      280 kPa (2.8 kgf/cm2, 41 psi)

      260 kPa (2.6 kgf/cm2, 38 psi)
      T145/70D17 106M -

      Driving at less than 80 km/h

      (50 mph)

      420 kPa (4.2 kgf/cm2, 60 psi)

      Note

      When towing a trailer, add 20 kPa (0.2 kgf/cm2, 3 psi) to the recommended tire pressure and drive at less than 100 km/h (62 mph).

    2. A01IQ29

      Using a dial indicator, check the runout of the tires.

      Standard tire runout
      1.0 mm (0.0394 in.) or less

  2. ROTATE TIRE

    A01INL4E01

    Tech Tips

    Rotate the tires as shown in the illustration.

  3. INSPECT WHEEL BALANCE


    1. Check and perform off-car balancing.

    2. If required, perform on-car balancing.

      Imbalance after adjustment
      8.0 g (0.018 lb.) or less

  4. INSPECT FRONT AXLE HUB BEARING


    1. Inspect the front axle hub bearing Click here.

  5. INSPECT REAR AXLE HUB BEARING


    1. Inspect the rear axle hub bearing Click here.