FRONT SHOCK ABSORBER REASSEMBLY

INSTALL FRONT COIL SPRING LOWER INSULATOR LH

1. 

   Install the front coil spring lower insulator.

   Note:

   Make sure that the positioning pin of the front coil spring lower insulator is inserted into the hole in the front shock absorber.

   Table 1. Text in Illustration

   *1	Positioning Pin

INSTALL FRONT SPRING BUMPER LH

INSTALL FRONT COIL SPRING LH

1. 

   Secure SST in a vise.

   09727-30021

   09727-00010

   09727-00021

   09727-00031

2. 

   Attach the arm of SST to the diameter of the coil spring.

   Table 2. Text in Illustration

   *a	Correct
   *b	Incorrect

   CAUTION:
   
   

   • Make sure that the coil spring is installed so that the distance between the upper and lower hooks of SST is at the maximum.

   • Make sure that the claws of the hooks are securely attached.

3. Using SST, compress the coil spring.

   CAUTION:
   
   

   • If the coil spring bends during the compression, immediately stop the compression and reinstall SST.

   • Do not compress the spring until the coil springs contact each other.

   • Do not use an impact wrench.

4. 

   Install the front coil spring.

   Note:
   

   • Make sure that the end of the front coil spring is positioned in the depression of the lower insulator.

   • Make sure to install the coil spring so that the paint marks are as shown in the illustration.

   Table 3. Text in Illustration

   *1	Paint Mark

INSTALL FRONT COIL SPRING UPPER INSULATOR LH

INSTALL STRUT MOUNTING BEARING LH

1. Install the mounting bearing to the upper insulator.

INSTALL FRONT SUSPENSION SUPPORT SUB-ASSEMBLY LH

TEMPORARILY INSTALL FRONT SUPPORT TO FRONT SHOCK ABSORBER NUT

1. 

   Temporarily install a new nut and the collar.