PATTERN SELECT SWITCH REMOVAL

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY


    1. Twist the shift lever knob in the direction indicated by the arrow and remove it.

      A01ISYGE01

  2. REMOVE POSITION INDICATOR HOUSING ASSEMBLY

    A01IROS

    1. Detach the 5 claws and 3 clips.

    2. Disconnect the connector and remove the position indicator housing.

  3. REMOVE NO. 1 PATTERN SELECT SWITCH ASSEMBLY


    1. A01IP0Z

      Detach the 2 claws and remove the No. 1 pattern select switch assembly from the position indicator housing assembly.