REAR WHEEL ALIGNMENT INSPECTION

INSPECT TIRES
1. Inspect the tires Click here.

MEASURE VEHICLE HEIGHT

CAUTION:

If it is necessary to go under the vehicle for measurement, make sure that the parking brake is applied and the vehicle is secured with chocks.

Note

Before inspecting the wheel alignment, adjust the vehicle height to the specified value.
Be sure to perform the measurement on a level surface.

Bounce the vehicle up and down at the corners several times to stabilize the suspension.

Measure the vehicle height.

Measuring points
A
Ground clearance of front lower suspension arm bushing set bolt center
B
Ground clearance of rear trailing arm bushing set bolt center
C
Ground clearance of front wheel center
D
Ground clearance of rear wheel center

Standard Vehicle Height (Unloaded Vehicle)

Seat Package	Tire Size	Front C - A	Rear D - B
7 or 5 Seats	205/60R16	101 mm (3.98 in.)	17 mm (0.669 in.)
7 or 5 Seats	215/55R17	102 mm (4.02 in.)	17 mm (0.669 in.)
2 Seats	205/60R16	99 mm (3.90 in.)	10 mm (0.393 in.)
2 Seats	215/55R17	100 mm (3.94 in.)	10 mm (0.393 in.)
5 Seats (for Rough Road Package)	205/60R16	87 mm (3.43 in.)	12 mm (0.472 in.)
7 or 5 Seats (for Rough Road Package)	215/55R17	88 mm (3.46 in.)	9 mm (0.354 in.)

Note

The standard value shown here is a value that is used for adjusting the wheel alignment and does not indicate the height of an actual vehicle.

INSPECT TOE-IN

Standard Toe-in Inclination (Unloaded Vehicle)

Seat Package	Tire Size	Toe-in Inclination	Right-left Difference
7 or 5 seats	205/60R16	B - A: 2.2 +/-3 mm (0.0866 +/-0.118 in.)	45' (0.75°) or less
7 or 5 seats	215/55R17	B - A: 2.3 +/-3 mm (0.0905 +/-0.118 in.)	45' (0.75°) or less
2 seats	205/60R16	B - A: 1.7 +/-3 mm (0.0669 +/-0.118 in.)	45' (0.75°) or less
2 seats	215/55R17	B - A: 1.7 +/-3 mm (0.0669 +/-0.118 in.)	45' (0.75°) or less
5 seats (for Rough Road Package)	205/60R16	B - A: 2.0 +/-3 mm (0.0787 +/-0.118 in.)	45' (0.75°) or less
7 or 5 seats (for Rough Road Package)	215/55R17	B - A: 1.8 +/-3 mm (0.0708 +/-0.118 in.)	45' (0.75°) or less

If the toe-in is not within the specified range, inspect the suspension parts and replace them if necessary.

INSPECT CAMBER

Install a camber-caster-kingpin gauge or set the vehicle on the wheel alignment tester.

Inspect the camber.

Standard Camber Inclination (Unloaded Vehicle)

Seat Package	Tire Size	Camber Inclination	Right-left Difference
7 or 5 seats	205/60R16	-1°23' +/-30' (-1.38° +/-0.5°)	30' (0.5°) or less
7 or 5 seats	215/55R17	-1°23' +/-30' (-1.38° +/-0.5°)	30' (0.5°) or less
2 seats	205/60R16	-1°22' +/-30' (-1.37° +/-0.5°)	30' (0.5°) or less
2 seats	215/55R17	-1°22' +/-30' (-1.37° +/-0.5°)	30' (0.5°) or less
5 seats (for Rough Road Package)	205/60R16	-1°22' +/-30' (-1.37° +/-0.5°)	30' (0.5°) or less
7 or 5 seats (for Rough Road Package)	215/55R17	-1°22' +/-30' (-1.37° +/-0.5°)	30' (0.5°) or less

Tech Tips

The camber is not adjustable. If the measurement is not within the specified range, inspect the suspension parts for damage and/or wear, and replace them if necessary.