FRONT DIFFERENTIAL OIL SEAL REPLACEMENT


  1. REMOVE REAR ENGINE UNDER COVER LH


    1. Remove the 5 clips and under cover.

  2. REMOVE REAR ENGINE UNDER COVER RH


    1. A01IP88

      Remove the 5 clips and under cover RH.

  3. DRAIN CONTINUOUSLY VARIABLE TRANSAXLE FLUID


    1. A01IQT6

      Remove the refill plug and gasket from the continuously variable transaxle assembly.

    2. A01INWW

      Using a 6 mm hexagon socket wrench, remove the overflow plug and gasket from the continuously variable transaxle assembly.

    3. A01IRH8E01
      Text in Illustration
      *1 No. 1 Transmission Oil Filler Tube

      Using a 6 mm hexagon socket wrench, remove the No. 1 transmission oil filler tube from the transaxle oil (CVT) pan sub-assembly.

      Tech Tips

      Removing the No. 1 transmission oil filler tube will drain all oil in the transaxle oil (CVT) pan sub-assembly.

    4. Using a 6 mm hexagon socket wrench, install the No. 1 transmission oil filler tube to the transaxle oil (CVT) pan sub-assembly.

      Torque:
      1.7 N*m  { 17 kgf*cm, 15 in.*lbf }

    5. Using a 6 mm hexagon socket wrench, temporarily install the overflow plug and gasket to the continuously variable transaxle assembly.

      Tech Tips

      Reuse the old gasket as the overflow plug will be removed again to adjust the fluid level.

    6. Temporarily install the gasket and refill plug to the continuously variable transaxle assembly.

      Tech Tips

      Reuse the old gasket as the refill plug will be removed again to adjust the fluid level.

  4. REMOVE FRONT DRIVE SHAFT ASSEMBLY

    Click here

  5. REMOVE FRONT DRIVE SHAFT OIL SEAL LH


    1. A01IUE7E01

      Using SST, remove the front drive shaft oil seal LH from the continuously variable transaxle assembly.

      SST
      09308-00010

  6. REMOVE FRONT DRIVE SHAFT OIL SEAL RH


    1. A01IRBHE02

      Using SST, remove the front drive shaft oil seal RH from the continuously variable transaxle assembly.

      SST
      09308-00010

  7. INSTALL FRONT DRIVE SHAFT OIL SEAL LH


    1. A01IQSHE01

      Apply MP grease to the lip of a new front drive shaft oil seal LH.

    2. Using SST and a hammer, install the front drive shaft oil seal LH to the continuously variable transaxle assembly.

      SST
      09387-00010
      09950-70010   ( 09951-07150 )
      Standard depth
      -0.5 to 0.5 mm (-0.0197 to 0.0197 in.)

      Note


      • Be sure to install the front drive shaft oil seal LH in the correct direction.

      • Make sure to install the front drive shaft oil seal LH as specified, otherwise malfunctions such as a fluid leak will occur.

  8. INSTALL FRONT DRIVE SHAFT OIL SEAL RH


    1. A01INOVE01

      Apply MP grease to the lip of a new front drive shaft oil seal RH.

    2. Using SST and a hammer, install the front drive shaft oil seal RH to the continuously variable transaxle assembly.

      SST
      09554-14010
      09950-70010   ( 09951-07100 )
      Standard depth
      -0.5 to 0.5 mm (-0.0197 to 0.0197 in.)

      Note


      • Be sure to install the front drive shaft oil seal RH in the correct direction.

      • Make sure to install the front drive shaft oil seal RH as specified, otherwise malfunctions such as a fluid leak will occur.

  9. INSTALL FRONT DRIVE SHAFT ASSEMBLY

    Click here

  10. ADD CONTINUOUSLY VARIABLE TRANSAXLE FLUID

    Click here

  11. INSPECT FOR FLUID LEAK

  12. INSTALL REAR ENGINE UNDER COVER RH


    1. A01IP88

      Install the under cover RH with the 5 clips.

  13. INSTALL REAR ENGINE UNDER COVER LH


    1. Install the under cover LH with the 5 clips.