Click here

OIL PAN INSTALLATION

Click here
Click here
  1. Click here

    INSTALL TRANSAXLE OIL PAN SUB-ASSEMBLY


    1. Install the 3 magnets to the oil pan.

      Table 1. Text in Illustration
      *1 Magnet

    2. Install a new gasket to the oil pan.

    3. A01ITW4

      Install the oil pan to the transaxle with the 16 bolts.

      7.8 N*m 80 kgf*cm 69 in.*lbf
      Note:

      Completely remove any oil or grease from the contact surface of the transaxle case and oil pan sub-assembly with gasket before installation.

  2. Click here

    INSTALL NO. 1 TRANSMISSION OIL FILLER TUBE


    1. Using a 6 mm socket hexagon wrench, install the No. 1 transmission oil filler tube to the oil pan.

      1.7 N*m 17 kgf*cm 15 in.*lbf
    2. A01IOQ2

      Using a 6 mm socket hexagon wrench, install a new gasket and the overflow plug to the oil pan.

      40 N*m 408 kgf*cm 30 ft.*lbf
  3. Click here

    ADD CONTINUOUSLY VARIABLE TRANSAXLE FLUID


    1. Add continuously variable transaxle fluid (Click here).

  4. Click here

    INSPECT FOR OIL LEAK

  5. Click here

    INSTALL REAR ENGINE UNDER COVER LH


    1. Install the under cover LH with the 5 clips.

  6. Click here

    INSTALL NO. 1 ENGINE UNDER COVER


    1. A01ISXU

      Install the under cover with the 11 clips and 6 bolts.