OIL PAN REMOVAL


  1. REMOVE NO. 1 ENGINE UNDER COVER


    1. A01ISXU

      Remove the 11 clips, 6 bolts and under cover.

  2. REMOVE REAR ENGINE UNDER COVER LH


    1. Remove the 5 clips and under cover.

  3. REMOVE NO. 1 TRANSMISSION OIL FILLER TUBE

    A01IOQ2

    1. Using a 6 mm socket hexagon wrench, remove the overflow plug and gasket from the continuously variable transaxle.

    2. A01ITXR

      Using a 6 mm socket hexagon wrench, remove the No. 1 transmission oil filler tube from the oil pan and drain the continuously variable transaxle fluid.

  4. REMOVE TRANSAXLE OIL PAN SUB-ASSEMBLY


    1. A01ITW4

      Remove the 16 bolts and oil pan from the transaxle.

      Note

      Some fluid will remain in the oil pan. To prevent the fluid from spilling, place a container under the oil pan, and then carefully remove all the pan bolts and oil pan assembly.

    2. Remove the gasket from the oil pan.

    3. A01IQPPE01
      Text in Illustration
      *1 Magnet

      Remove the 3 magnets from the oil pan.

      Note


      • Clean the oil pan and remove any metal particles, sludge, etc.

      • Clean off any metal particles that adhere to the magnets.