BACK-UP LIGHT SWITCH INSTALLATION


  1. INSTALL BACK-UP LIGHT SWITCH ASSEMBLY


    1. A01IS9GE01

      Using SST, install a new gasket and the back-up light switch to the transaxle case.

      SST
      09817-16011
      Torque:
      40 N*m  { 410 kgf*cm, 30 ft.*lbf }

    2. Connect the back-up light switch connector.

  2. INSTALL AIR CLEANER CASE SUB-ASSEMBLY


    1. A01IQF0

      Install the air cleaner case with the 3 bolts.

      Torque:
      7.0 N*m  { 71 kgf*cm, 62 in.*lbf }

    2. Attach the wire harness clamp to the air cleaner case.

  3. INSTALL AIR CLEANER CAP SUB-ASSEMBLY


    1. A01IPUC

      Connect the air cleaner cap with the band.

    2. Connect the PCV hose.

    3. A01IP4V

      Connect the 2 clamps.

    4. A01ISEG

      Attach the 2 clamps and connect the wire harness.

    5. Connect the mass air flow meter connector.

  4. INSTALL NO. 2 CYLINDER HEAD COVER


    1. A01IOL8

      Install the under cover with the 4 clips.