SHIFT LEVER ASSEMBLY REMOVAL

REMOVE BOX PANEL SUB-ASSEMBLY
1. Remove the box panel sub-assembly Click here.
REMOVE INSTRUMENT PANEL FINISH PANEL END LH
1. for Automatic Air Conditioning System:
  1. Text in Illustration
    
    *1 Protective Tape
    
    Put protective tape around the instrument panel finish panel end LH.
  2. Using a moulding remover A, detach the 3 clips and 2 guides, and remove the instrument panel finish panel end LH.
2. for Manual Air Conditioning System:
  1. Text in Illustration
    
    *1 Protective Tape
    
    Put protective tape around the instrument panel finish panel end LH.
  2. Using a moulding remover A, detach the 3 clips and guide, and remove the instrument panel finish panel end LH.
REMOVE INSTRUMENT PANEL FINISH PANEL END RH
Text in Illustration

*1 Protective Tape
1. for Automatic Air Conditioning System:
  1. Put protective tape around the instrument panel finish panel end RH.
  2. Using a moulding remover A, detach the 3 clips, claw and 2 guides, and remove the instrument panel finish panel end RH.
2. Text in Illustration
  
  *1 Protective Tape
  
  for Manual Air Conditioning System:
  1. Put protective tape around the instrument panel finish panel end RH.
  2. Using a moulding remover A, detach the 3 clips, claw and guide, and remove the instrument panel finish panel end.
REMOVE CENTER INSTRUMENT PANEL REGISTER ASSEMBLY
1. Detach the 8 claws and 4 guides.
2. Disconnect the connector and remove the center instrument panel register.
REMOVE RADIO RECEIVER ASSEMBLY (w/ Audio)
1. Remove the 4 screws.
2. Pull the radio receiver assembly with bracket to detach the 4 clips on the backside of the radio receiver assembly with bracket.
3. Disconnect the connectors and remove the radio receiver assembly with bracket.
REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/o Audio)
1. Detach the 4 clips, 3 claws and 3 guides, and remove the center instrument cluster finish panel.
REMOVE STEREO OPENING COVER WITH BRACKET (w/o Audio)
1. Remove the 4 bolts and stereo opening cover.
REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY
1. Twist the shift lever knob in the direction indicated by the arrow and remove it.
REMOVE SHIFTING HOLE COVER
Text in Illustration

*1 T Washer
1. Twist the T washer in the direction indicated by the arrow and remove it.
2. Remove the knob spring.
3. Detach the 5 claws and 3 clips, and remove the shifting hole cover.
REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL
1. for Automatic Air Conditioning System:
  1. Remove the 2 screws <C>.
  2. Detach the 2 claws, 4 clips and 5 guides, and remove the lower center instrument panel finish panel.
    
    Tech Tips
    
    If the 2 claws shown in the illustration are difficult to detach, detach the 4 clips of the air conditioning control and remove the lower center instrument panel finish panel together with the air conditioning control.
2. for Manual Air Conditioning System:
  1. Remove the 2 screws <C>.
  2. Detach the 4 clips, 2 claws and 5 guides, and remove the lower center instrument panel finish panel.
REMOVE FRONT NO. 1 CONSOLE BOX INSERT
1. Detach the 3 claws and guide, and remove the front No. 1 console box insert.
REMOVE FRONT NO. 2 CONSOLE BOX INSERT
1. Detach the 3 claws and guide, and remove the front No. 2 console box insert.
REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL
1. Remove the screw <D>.
2. Disconnect the connector.
3. Detach the 4 clips and remove the lower No. 1 instrument panel finish panel.
DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY
1. Text in Illustration
  
  *1 Select Cable
  
  *2 Shift Cable
  
  Disconnect the control shift cable from the shift lever assembly.
2. Pinch the areas indicated by the arrows and disconnect the control select cable.
3. Detach the 2 claws and disconnect the control cable assembly.
REMOVE SHIFT LEVER ASSEMBLY
1. Remove the 4 nuts and shift lever assembly.

Text in Illustration
*1	Select Cable
*2	Shift Cable