SHIFT AND SELECT LEVER SHAFT DISASSEMBLY


  1. REMOVE INNER NO. 2 SHIFT LEVER


    1. Secure the shift and select lever shaft assembly in a vise between aluminum plates.

    2. A01IU40

      Using a 5 mm pin punch and hammer, remove the slotted spring pin and inner No. 2 shift lever from the shift and select lever shaft.

      Tech Tips

      Make a note of the orientation of the inner No. 2 shift lever so that it can be reinstalled in the same position.

  2. REMOVE RELEASE HEAD STRAIGHT PIN


    1. A01IO48

      Using a 5 mm pin punch and hammer, remove the slotted spring pin from the select stopper block.

    2. A01INEO

      Using a 5 mm pin punch and hammer, remove the slotted spring pin from the front inner shift lever.

    3. A01IRDG

      Turn the release head clockwise.

    4. A01IR7L

      Slide the select stopper block upwards and remove the release head straight pin from the front inner shift lever.

  3. REMOVE SELECT STOPPER BLOCK


    1. A01IQE1

      Remove the front inner shift lever, release head torsion spring, release head and select stopper block from the shift and select lever shaft.

      Tech Tips

      Make a note of the orientation of the front inner shift lever, release head torsion spring, release head and select stopper block so that they can be reinstalled in the same position.