MANUAL TRANSAXLE ASSEMBLY (except 1WW) REMOVAL


  1. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE


    1. Remove the engine assembly with transaxle Click here.

  2. REMOVE REAR ENGINE MOUNTING INSULATOR


    1. A01IQL4

      Remove the 3 bolts, 2 nuts and rear engine mounting insulator.

  3. REMOVE NO. 1 AIR TUBE


    1. A01IS5M

      Loosen the hose clamp.

    2. Remove the 2 bolts and No. 1 air tube.

  4. REMOVE STARTER ASSEMBLY


    1. A01INZ3

      Disconnect the starter connector.

    2. Open the terminal cap, remove the nut and disconnect the starter wire.

    3. A01INO6

      Remove the 2 bolts and starter.

  5. REMOVE AIR TUBE SUPPORT


    1. A01IT0E

      Remove the 2 bolts and air tube support.

  6. REMOVE ENGINE WIRE

    A01IP56

    1. Disconnect the back-up light switch connector, remove the 2 bolts, detach the 3 clamps and remove the engine wire from the manual transaxle.

  7. REMOVE OIL PAN INSULATOR


    1. A01IP2X

      Remove the 2 bolts and oil pan insulator.

  8. REMOVE STIFFENER PLATE LH


    1. A01IO7D

      Remove the 4 bolts and stiffener plate LH.

  9. REMOVE STIFFENER PLATE RH


    1. A01IRFC

      Remove the 4 bolts and stiffener plate RH.

  10. REMOVE MANUAL TRANSAXLE ASSEMBLY


    1. A01IS39

      Remove the 5 bolts and manual transaxle assembly from the engine.

  11. REMOVE ENGINE MOUNTING BRACKET LH


    1. A01IQ3R

      Remove the 4 bolts and engine mounting bracket LH.

  12. REMOVE FRONT ENGINE MOUNTING BRACKET


    1. A01IQ5X

      Remove the 3 bolts and front engine mounting bracket.

  13. REMOVE REAR ENGINE MOUNTING BRACKET


    1. A01IUP9

      Remove the 5 bolts and rear engine mounting bracket.