Click here

MANUAL TRANSAXLE OIL REPLACEMENT

Click here
Click here Click here
  1. Click here

    REMOVE ENGINE UNDER COVER


    1. A01IUJJ

      Remove the 9 clips and fold back the engine under cover.

      Tip:

      It is not necessary to fully remove the engine under cover. Partially remove it so that the oil can be replaced in a later step.

  2. Click here

    DRAIN MANUAL TRANSAXLE OIL


    1. A01IP1ME01

      Remove the filler plug and gasket.

      Table 1. Text in Illustration
      *1 Filler Plug
      *2 Drain Plug

    2. Remove the drain plug and gasket to drain the manual transaxle oil.

    3. Install a new gasket and the drain plug.

      39 N*m 400 kgf*cm 29 ft.*lbf
  3. Click here

    ADD MANUAL TRANSAXLE OIL


    1. Add manual transaxle oil.

      Manual Transaxle Oil
      "Toyota Genuine Manual Transmission Gear Oil LV" or "API GL-4 and SAE 75W"
      Capacity (Reference)
      for 1WW
      2.1 liters (2.2 US qts, 1.8 Imp. qts)
      except 1WW
      2.3 liters (2.4 US qts, 2.0 Imp. qts)
    2. A01IQEZE49

      Check that the oil surface is within 5 mm (0.196 in.) of the bottom of the manual transmission filler plug opening.

      Table 2. Text in Illustration
      *a 0 to 5 mm (0 to 0.196 in.)

    3. Install a new gasket and the transmission filler plug.

      39 N*m 400 kgf*cm 29 ft.*lbf
      Note:

      • When adding transaxle oil, make sure the vehicle is level.

      • An excessively large or small amount of oil may cause problems.

      • After adding oil, drive the vehicle and recheck the oil level.

  4. Click here

    INSPECT FOR OIL LEAK

  5. Click here

    INSTALL ENGINE UNDER COVER


    1. A01IQXZ

      Install the engine under cover with the 9 clips.