INPUT SHAFT REASSEMBLY


  1. INSTALL INPUT SHAFT FRONT BEARING


    1. A01IOY2E01

      Using SST and a press, press in the front bearing into the input shaft.

      SST
      09608-00071

  2. INSTALL INPUT SHAFT SNAP RING


    1. A01IQSN

      Using a brass bar and hammer, tap a new snap ring onto the input shaft.

  3. INSTALL 4TH DRIVE GEAR


    1. A01IQ8HE01

      Using SST and a press, press in the 4th drive gear into the input shaft.

      SST
      09309-14040

  4. INSTALL 3RD DRIVE GEAR


    1. A01IMXX

      Install the spacer into the input shaft.

    2. A01IOBBE01

      Using SST and a press, press in the 3rd drive gear into the input shaft.

      SST
      09309-14040

  5. INSTALL 6TH DRIVE GEAR


    1. A01IPQVE01

      Using SST and a press, press in the 6th drive gear into the input shaft.

      SST
      09309-14040

  6. INSTALL INPUT SHAFT REAR RADIAL BALL BEARING


    1. A01IUACE01

      Using SST and a press, press in the input shaft rear radial ball bearing into the input shaft.

      SST
      09506-30012

  7. INSTALL INPUT SHAFT REAR BEARING SHAFT SNAP RING


    1. A01IR5BE03
      Text in Illustration
      *1 Mark

      Select a new snap ring, using the table below, that makes the thrust clearance of the input shaft bearing less than 0.1 mm (0.00394 in.).

      Standard snap ring thickness
      Mark Specified Condition Mark Specified Condition
      A 1.80 to 1.85 mm (0.0709 to 0.0728 in.) 3 2.20 to 2.25 mm (0.0866 to 0.0886 in.)
      B 1.85 to 1.90 mm (0.0728 to 0.0748 in.) 4 2.25 to 2.30 mm (0.0886 to 0.0906 in.)
      C 1.90 to 1.95 mm (0.0748 to 0.0768 in.) 5 2.30 to 2.35 mm (0.0906 to 0.0925 in.)
      D 1.95 to 2.00 mm (0.0768 to 0.0787 in.) 6 2.35 to 2.40 mm (0.0925 to 0.0945 in.)
      E 2.00 to 2.05 mm (0.0787 to 0.0807 in.) F 2.40 to 2.45 mm (0.0945 to 0.0965 in.)
      0 2.05 to 2.10 mm (0.0807 to 0.0827 in.) G 2.45 to 2.50 mm (0.0965 to 0.0984 in.)
      1 2.10 to 2.15 mm (0.0827 to 0.0846 in.) H 2.50 to 2.55 mm (0.0984 to 0.100 in.)
      2 2.15 to 2.20 mm (0.0846 to 0.0866 in.) - -
    2. A01IRE1

      Using a snap ring expander, install the snap ring into the input shaft.