Click here

DIFFERENTIAL OIL SEAL REPLACEMENT

Click here
Click here Click here
  1. Click here

    REMOVE FRONT DRIVE SHAFT ASSEMBLY


    1. Remove the front drive shaft assembly (Click here).

  2. Click here

    REMOVE DRIVE SHAFT BEARING BRACKET


    1. A01IP75

      Remove the 3 bolts and bearing bracket.

  3. Click here

    REMOVE TRANSAXLE CASE OIL SEAL LH


    1. A01IOV8E01

      Using SST, remove the transaxle case oil seal LH.

      09308-00010
  4. Click here

    REMOVE TRANSAXLE CASE OIL SEAL RH


    1. A01ISK5E01

      Using SST, remove the transaxle case oil seal RH.

      09308-00010
  5. Click here

    INSTALL TRANSAXLE CASE OIL SEAL LH


    1. Coat the lip of a new oil seal with MP grease.

    2. A01IQ61E01

      Using SST and a hammer, tap in the transaxle case oil seal LH to the manual transaxle case.

      09950-70010 09951-07200
      09608-32010
      Standard depth
      -0.5 to 0.5 mm (-0.0197 to 0.0197 in.)
      Note:

      Do not damage the oil seal lip.

  6. Click here

    INSTALL TRANSAXLE CASE OIL SEAL RH


    1. Coat the lip of a new oil seal with MP grease.

    2. A01ITDSE01

      Using SST and a hammer, tap in the transaxle case oil seal RH to the front transaxle case.

      09950-70010 09951-07200
      09649-17010
      Standard depth
      -0.5 to 0.5 mm (-0.0197 to 0.0197 in.)
      Note:

      Do not damage the oil seal lip.

  7. Click here

    INSTALL DRIVE SHAFT BEARING BRACKET


    1. Install the bearing bracket with the 3 bolts.

      64 N*m 650 kgf*cm 47 ft.*lbf
  8. Click here

    INSTALL FRONT DRIVE SHAFT ASSEMBLY


    1. Install the front drive shaft assembly (Click here).

  9. Click here

    INSPECT FOR OIL LEAK