CLUTCH PEDAL SWITCH INSPECTION


  1. INSPECT CLUTCH START SWITCH ASSEMBLY


    1. A01IQLKE25
      Text in Illustration
      *1 7.65 to 8.35 mm (0.301 to 0.329 in.)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      1 - 2 On (pushed) Below 1 Ω
      Off (free) 10 kΩ or higher

      If the result is not as specified, replace the clutch start switch assembly.