SHIFT LEVER ASSEMBLY INSTALLATION


  1. INSTALL SHIFT LEVER ASSEMBLY


    1. A01ITPR

      Install the shift lever assembly with the 4 nuts.

      Torque:
      12 N*m  { 122 kgf*cm, 9 ft.*lbf }

  2. INSTALL TRANSMISSION CONTROL CABLE ASSEMBLY


    1. A01IS3A

      Attach the 2 claws and connect the control cable assembly to the shift lever assembly.

      Note

      Make sure that the claws are firmly engaged.

    2. A01IQBRE02
      Text in Illustration
      *1 Select Cable
      *2 Shift Cable

      Connect the control shift cable to the shift lever assembly.

    3. Connect the control select cable to the shift lever assembly.

  3. ADJUST CONTROL SELECT CABLE


    1. Adjust the control select cable Click here.

  4. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

    A01IPGW

    1. Attach the 4 clips to install the lower No. 1 instrument panel finish panel.

    2. Connect the connector.

    3. Install the screw <D>.

  5. INSTALL FRONT NO. 2 CONSOLE BOX INSERT


    1. Attach the 3 claws and guide to install the front No. 2 console box insert.

      A01IQC5E01

  6. INSTALL FRONT NO. 1 CONSOLE BOX INSERT


    1. Attach the 3 claws and guide to install the front No. 1 console box insert.

      A01IUSGE01

  7. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL

    A01IOQT

    1. for Automatic Air Conditioning System:


      1. Attach the 2 claws, 4 clips and 5 guides to install the lower center instrument panel finish panel.

      2. Install the 2 screws <C>.

    2. A01IQS2

      for Manual Air Conditioning System:


      1. Attach the 4 clips, 2 claws and 5 guides to install the lower center instrument panel finish panel.

      2. Install the 2 screws <C>.

  8. INSTALL SHIFTING HOLE COVER

    A01INHVE01
    Text in Illustration
    *1 T Washer

    1. Attach the 5 claws and 3 clips to install the shifting hole cover.

    2. Install the knob spring.

    3. Install the T washer and twist it in the direction indicated by the arrow.

  9. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY


    1. Install the shift lever knob and twist it in the direction indicated by the arrow.

      A01IQX6E01

  10. INSTALL STEREO OPENING COVER WITH BRACKET (w/o Audio)

    A01ISEY

    1. Install the stereo opening cover with the 4 bolts.

  11. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/o Audio)

    A01IRZ3

    1. Attach the 4 clips, 3 claws and 3 guides to install the center instrument cluster finish panel.

  12. INSTALL RADIO RECEIVER ASSEMBLY (w/ Audio)


    1. Connect the connectors.

    2. A01IN8Y

      Insert the radio receiver assembly with bracket to attach the 4 clips on its backside.

      Note

      When inserting the radio receiver, do not press the knobs on it.

    3. Install the radio receiver assembly with bracket with the 4 screws.

      Torque:
      4.0 N*m  { 40 kgf*cm, 35 in.*lbf }

  13. INSTALL CENTER INSTRUMENT PANEL REGISTER ASSEMBLY

    A01IQZA

    1. Connect the connector.

    2. Attach the 8 claws and 4 guides to install the center instrument panel register.

  14. INSTALL INSTRUMENT PANEL FINISH PANEL END RH

    A01IRVW

    1. for Automatic Air Conditioning System:

      Attach the 3 clips, claw and 2 guides to install the instrument panel finish panel end RH.

    2. A01ISYI

      for Manual Air Conditioning System:

      Attach the 3 clips, claw and guide to install the instrument panel finish panel end RH.

  15. INSTALL INSTRUMENT PANEL FINISH PANEL END LH


    1. A01IPRP

      for Automatic Air Conditioning System:

      Attach the 3 clips and 2 guides to install the instrument panel finish panel end LH.

    2. A01IOHW

      for Manual Air Conditioning System:

      Attach the 3 clips and guide to install the instrument panel finish panel end LH.

  16. INSTALL BOX PANEL SUB-ASSEMBLY


    1. Install the box panel sub-assembly Click here.