CLUTCH PEDAL (for RHD) REMOVAL


  1. REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY


    1. Remove the instrument panel safety pad sub-assembly Click here.

  2. REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY


    1. Remove the lower No. 1 instrument panel airbag assembly Click here.

  3. REMOVE CLUTCH MASTER CYLINDER PUSH ROD CLEVIS WITH HOLE PIN


    1. A01IR3SE03

      Remove the clip and clutch master cylinder push rod clevis with hole pin.

  4. REMOVE CLUTCH PEDAL SUPPORT SUB-ASSEMBLY


    1. Disconnect the clutch start switch assembly connector and clutch switch assembly connector.

    2. A01IU4E

      Remove the 2 nuts, 2 bolts and clutch pedal support sub-assembly.

  5. REMOVE CLUTCH SWITCH ASSEMBLY


    1. A01IURL

      Remove the nut and clutch switch assembly from the clutch pedal support.

  6. REMOVE CLUTCH START SWITCH ASSEMBLY

    A01IP3W

    1. Remove the nut and clutch start switch assembly.

  7. REMOVE CENTER OVER SPRING CAP

    A01IQ08

    1. Using needle-nose pliers, remove the center over spring cap from the clutch pedal sub-assembly.

  8. REMOVE TURN OVER SPRING SEAT COMPRESSION SPRING

    A01IR10

    1. While the clutch pedal is fully depressed, remove the turn over spring seat compression spring.

      CAUTION:

      As the clutch pedal may move suddenly when removing the spring, be careful to prevent your hand from being caught in the parts.

  9. REMOVE CLUTCH PEDAL SPRING HOLDER

    A01IR78

    1. Remove the clutch pedal spring holder from the clutch pedal support sub-assembly.

  10. REMOVE CLUTCH PEDAL STOPPER BOLT


    1. A01IT0V

      Loosen the lock nut and remove the clutch pedal stopper bolt together with the nut from the clutch pedal support sub-assembly.

  11. REMOVE PEDAL WITH HOOK SPRING (for 1AD-FTV)

    A01IT93

    1. Remove the clutch pedal spring.

  12. REMOVE PEDAL SPRING HOOK (for 1AD-FTV)

    A01IQBP

    1. Remove the pedal spring hook from the clutch pedal support sub-assembly.

  13. REMOVE CLUTCH PEDAL SUB-ASSEMBLY


    1. A01IT4C

      Remove the bolt and nut.

    2. Remove the clutch pedal sub-assembly from the clutch pedal support sub-assembly.

  14. REMOVE CLUTCH PEDAL PAD


    1. Remove the clutch pedal pad from the clutch pedal sub-assembly.

  15. REMOVE CLUTCH PEDAL BUSHING

    A01ISI4

    1. Remove the 2 clutch pedal bushings and collar from the clutch pedal sub-assembly.

  16. REMOVE NO. 1 CLUTCH PEDAL CUSHION


    1. A01IRRV

      Using needle-nose pliers, remove the 2 No. 1 clutch pedal cushions from the clutch pedal sub-assembly.

  17. REMOVE CLUTCH MASTER CYLINDER PUSH ROD CLEVIS BUSHING


    1. A01IT46

      Using an 8 mm hexagon wrench and hammer, remove the clutch master cylinder push rod clevis bushing from the clutch pedal sub-assembly.

  18. REMOVE CLUTCH PEDAL TURNOVER BUSH

    A01INS5

    1. Remove the clutch pedal turnover bush from the clutch pedal sub-assembly.