DIFFERENTIAL CASE DISASSEMBLY


  1. REMOVE FRONT DIFFERENTIAL RING GEAR

    A01IRGME05

    1. Put matchmarks on the front differential ring gear and differential case.

      Text in Illustration
      *1 Matchmark
    2. A01IRO8

      Remove the 12 bolts.

    3. A01IODB

      Using a plastic-faced hammer, tap on the front differential ring gear to remove it from the case.

  2. REMOVE FRONT DIFFERENTIAL CASE FRONT TAPERED ROLLER BEARING

    A01IUB6E08
    Text in Illustration
    *1 Turn
    *2 Hold

    1. Using SST, remove the front differential case front tapered roller bearing from the differential case.

      SST
      09950-00020
      09950-00030
      09950-60010   ( 09951-00480 )

  3. REMOVE FRONT DIFFERENTIAL CASE REAR TAPERED ROLLER BEARING

    A01IRUIE07
    Text in Illustration
    *1 Turn
    *2 Hold

    1. Using SST, remove the front differential case rear tapered roller bearing from the differential case.

      SST
      09950-00020
      09950-00030
      09950-60010   ( 09951-00480 )

  4. REMOVE FRONT DIFFERENTIAL PINION SHAFT STRAIGHT PIN

    A01IPM0

    1. Using a pin punch, unstake the differential case.

    2. Using a 3 mm pin punch and hammer, tap out the straight pin.

  5. REMOVE FRONT NO. 1 DIFFERENTIAL PINION SHAFT

    A01IQFO

    1. Remove the front No. 1 differential pinion shaft from the differential case.

  6. REMOVE DIFFERENTIAL SIDE GEAR

    A01IU2FE01

    1. Remove the 2 front differential pinions, 2 pinion thrust washers, 2 differential side gears, and 2 side gear thrust washers from the differential case.