Click here

TCM REMOVAL

Click here
Click here Click here
  1. Click here

    REMOVE REAR ENGINE UNDER COVER LH


    1. A01INGO

      Remove the 5 clips and rear engine under cover LH.

  2. Click here

    PRECAUTION

    Note:

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).

  3. Click here

    DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

  4. Click here

    REMOVE BATTERY


    1. Disconnect the cable from the positive (+) battery terminal.

    2. Remove the bolt and loosen the nut.

    3. Remove the battery clamp.

    4. Remove the battery.

    5. Remove the battery tray.

  5. Click here

    REMOVE BATTERY CARRIER


    1. A01ISD1

      Detach the 2 clamps and disconnect the wire harness.

    2. Remove the 4 bolts and battery carrier.

  6. Click here

    REMOVE TCM


    1. Detach the claw, turn the lock lever and disconnect the connector from the TCM.

    2. A01ISIM

      Remove the 2 bolts and pull up the TCM from the transaxle to remove it.