Click here

DIFFERENTIAL OIL SEAL REPLACEMENT

Click here
Click here Click here
  1. Click here

    REMOVE NO. 1 ENGINE UNDER COVER


    1. A01IRQL

      Remove the 6 bolts and 10 clips.

    2. Remove the No. 1 engine under cover.

  2. Click here

    REMOVE REAR ENGINE UNDER COVER LH


    1. A01INGO

      Remove the 5 clips and under cover.

  3. Click here

    REMOVE REAR ENGINE UNDER COVER RH


    1. A01IQ51

      Remove the 5 clips and under cover.

  4. Click here

    DRAIN AUTOMATIC TRANSAXLE FLUID


    1. Remove the refill plug and gasket from the automatic transaxle.

    2. A01IN7E

      Using a 6 mm socket hexagon wrench, remove the overflow plug and gasket from the automatic transaxle.

    3. A01IRC5E04

      Using a 6 mm socket hexagon wrench, remove the No. 1 transmission oil filler tube from the automatic transaxle and drain the automatic transaxle fluid.

    4. Using a 6 mm socket hexagon wrench, install the No. 1 transmission oil filler tube to the automatic transaxle.

      1.7 N*m 17 kgf*cm 15 in.*lbf
      Table 1. Text in Illustration
      *1 No. 1 Transmission Oil Filler Tube
      *2 Hexagon Socket Wrench
      *3 Overflow Plug Hole

    5. Using a 6 mm socket hexagon wrench, install a new gasket and the overflow plug to the automatic transaxle.

      40 N*m 408 kgf*cm 30 ft.*lbf

    6. Temporarily install the gasket and the refill plug to the automatic transaxle.

  5. Click here

    REMOVE FRONT DRIVE SHAFT ASSEMBLY LH AND RH


    1. Remove the front drive shaft LH and RH (Click here).

  6. Click here

    REMOVE DRIVE SHAFT BEARING BRACKET


    1. A01IP75

      Remove the 3 bolts and bearing bracket.

  7. Click here

    REMOVE TRANSAXLE CASE OIL SEAL LH


    1. Using SST, tap out the transaxle case oil seal.

      09308-00010
  8. Click here

    REMOVE TRANSAXLE CASE OIL SEAL RH


    1. Using SST, tap out the transaxle case oil seal.

      09308-00010
  9. Click here

    INSTALL TRANSAXLE CASE OIL SEAL LH


    1. Using SST and a hammer, tap in a new transaxle case oil seal.

      09316-10010
      09950-70010 09951-07100
      Oil seal depth
      -0.5 to 0.5 mm (-0.0197 to 0.0197 in.)
      Note:

      Check that the oil seal is installed in the correct direction.

    2. Coat the lip of the transaxle case oil seal with MP grease.

  10. Click here

    INSTALL TRANSAXLE CASE OIL SEAL RH


    1. Using SST and a hammer, tap in a new transaxle case oil seal.

      09316-60011 09316-00011
      Oil seal depth
      -0.5 to 0.5 mm (-0.0197 to 0.0197 in.)
      Note:

      Check that the oil seal is installed in the correct direction.

    2. Coat the lip of the transaxle case oil seal with MP grease.

  11. Click here

    INSTALL DRIVE SHAFT BEARING BRACKET


    1. Install the bearing bracket with the 3 bolts.

      64 N*m 650 kgf*cm 47 ft.*lbf
  12. Click here

    INSTALL FRONT DRIVE SHAFT ASSEMBLY LH AND RH


    1. Install the front drive shaft LH and RH (Click here).

  13. Click here

    ADD AUTOMATIC TRANSAXLE FLUID


    1. Add automatic transaxle fluid (Click here).

  14. Click here

    INSTALL REAR ENGINE UNDER COVER RH


    1. Install the under cover with the 5 clips.

  15. Click here

    INSTALL REAR ENGINE UNDER COVER LH


    1. Install the under cover with the 5 clips.

  16. Click here

    INSTALL NO. 1 ENGINE UNDER COVER


    1. A01IRQL

      Install the No. 1 engine under cover with the 10 clips and 6 bolts.