Click here

SHIFT PADDLE SWITCH INSPECTION

Click here
Click here Click here
  1. Click here

    INSPECT TRANSMISSION SHIFT SWITCH ASSEMBLY (LH (-) AND RH (+))


    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Table 1. for LH
      Tester Connection Switch Condition Specified Condition
      SDN - ECC Shift switch held in "-" (down-shift) Below 2.5 Ω
      SDN - ECC Shift switch not held in "-" (down-shift) 10 kΩ or higher
      Table 2. for RH
      Tester Connection Switch Condition Specified Condition
      SUP - ECC Shift switch held in "+" (up-shift) Below 2.5 Ω
      SUP - ECC Shift switch not held in "+" (up-shift) 10 kΩ or higher
      Table 3. Text in Illustration
      *1

      Component without wire harness connected

      (Transmission Shift Switch Assembly)
      *2 for LH
      *3 for RH

      If the result is not as specified, replace the transmission shift switch assembly.