Click here

SHIFT PADDLE SWITCH REMOVAL

Click here
Click here Click here
  1. Click here

    PLACE FRONT WHEELS FACING STRAIGHT AHEAD

  2. Click here

    PRECAUTION

    Note:

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).

  3. Click here

    DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

  4. Click here

    REMOVE STEERING PAD


    1. A01IQYJ

      Using a screwdriver, detach the 2 springs.

    2. A01INT0

      Pull out the steering pad from the steering wheel as shown in the illustration and support the steering pad with one hand.

      Note:

      When removing the steering pad, do not pull the airbag wire harness.

    3. Disconnect the horn connector.

    4. Disconnect the connector and remove the steering pad.

      Note:

      When handling the airbag connector, take care not to damage the airbag wire harness.

  5. Click here

    REMOVE STEERING WHEEL ASSEMBLY


    1. A01IQZBE01

      Remove the steering wheel assembly set nut.

    2. Put matchmarks on the steering wheel assembly and steering main shaft.

      Table 1. Text in Illustration
      *1 Matchmark

    3. Disconnect the connectors from the spiral cable.

    4. A01IRJRE01

      Using SST, remove the steering wheel assembly.

      09950-50013 09951-05010 09952-05010 09953-05020 09954-05021
      Table 2. Text in Illustration
      *1 Turn
      *2 Hold
      Note:

      Apply a small amount of grease to the threads and tip of SST (09953-05020) before use.

  6. Click here

    REMOVE NO. 1 SWITCH WIRE


    1. Disconnect the 3 connectors from the 2 shift switches and steering pad switch harness connector, detach the wire harness from the 2 guides and remove the switch wire.

  7. Click here

    REMOVE TRANSMISSION SHIFT SWITCH ASSEMBLY


    1. Remove the 4 screws, 2 switch brackets and 2 shift switches.