1WW DRIVING SUPPORT ECU (for LHD) REMOVAL


  1. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY

    A01IP4S

    1. Push in the sides of the glove compartment door to release the 2 stoppers and open the glove compartment door until it is horizontal.

    2. Detach the glove compartment door stopper from the glove compartment door as shown in the illustration.

    3. A01IP3S

      Pull the glove compartment door toward the rear of the vehicle to detach the 2 hinges and remove the glove compartment door.

  2. REMOVE DRIVING SUPPORT ECU ASSEMBLY


    1. A01IOUM

      Disconnect the connector.

    2. Remove the nut.

    3. Detach the claw and remove the driving support ECU assembly.