CRUISE CONTROL SYSTEM (for 1WW) DATA LIST / ACTIVE TEST
-
DATA LIST
Tech Tips
Using the GTS to read the Data List allows values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Note
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
-
Connect the GTS to the DLC3.
-
Turn the ignition switch to ON.
-
Turn the GTS on.
-
Enter the following menus: Powertrain / Cruise Control / Data List.
-
According to the display on the GTS, read the Data List.
Cruise Control Tester Display Measurement Item/Range Normal Condition Diagnostic Note Cruise Request Torque Request torque / Min.: -32768 N, Max.: 32767 N Actual vehicle torque - Cruise Operation Status Cruise control status / ON or OFF ON: Cruise control operating
OFF: Cruise control not operating
- Cruise Control Cruise control system active condition / ON or OFF ON: Cruise control activated
OFF: Cruise control deactivated
- CCS Indicator M-CPU Cruise control indicator signal (Main-CPU) / ON or OFF ON: Cruise control indicator illuminated
OFF: Cruise control indicator not illuminated
- Stop Light Switch 1 Stop light switch signal / ON or OFF ON: Brake pedal depressed
OFF: Brake pedal released
- ST- Signal Stop light switch signal / ON or OFF ON: Brake pedal depressed
OFF: Brake pedal released
- STP Signal Stop light switch signal / ON or OFF ON: Brake pedal depressed
OFF: Brake pedal released
- +RES SW +RES switch signal / ON or OFF ON: +RES switch on
OFF: +RES switch off
- -SET SW -SET switch signal / ON or OFF ON: -SET switch on
OFF: -SET switch off
- CANCEL SW CANCEL switch signal / ON or OFF ON: CANCEL switch on
OFF: CANCEL switch off
- Driving Support System Dynamic radar cruise control system information / With or Without With: With Dynamic radar cruise control system
Without: Without Dynamic radar cruise control system
This item is displayed on the GTS but is not used. Vehicle Speed Used for CCS and ASL Computation Vehicle speed / Min.: 0 km/h (0 mph), Max.: 255 km/h (158 mph) Actual vehicle speed - Brake Cancel Switch Brake cancel signal / ON or OFF ON: Brake pedal depressed
OFF: Brake pedal released
- Cruise Control Switch Cruise control switch signal / ON or OFF ON: Cruise control switch (ON-OFF switch) pushed
OFF: Cruise control switch (ON-OFF switch) released
- Cruise Control Cancel Signal Cruise control cancel signal / ON or OFF ON: CANCEL switch on
OFF: CANCEL switch off
- # Codes (Include History) Number of DTCs / Min.: 0, Max.: 255 Actual number of DTCs -
-
-
ACTIVE TEST
Tech Tips
Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
-
Connect the GTS to the DLC3.
-
Turn the ignition switch to ON.
-
Turn the GTS on.
-
Enter the following menus: Body Electrical / Combination Meter / Active Test.
-
According to the display on the GTS, perform the Active Test.
Combination Meter Tester Display Test Part Control Range Diagnostic Note Indicat. Lamp Cruise Cruise control indicator light ON/OFF - Indicat. SET Cruise control SET indicator light ON/OFF -
-