GLOW PLUG INSTALLATION


  1. INSTALL GLOW PLUG ASSEMBLY

    A01IUCDE01

    1. Using SST, install the 4 glow plug assemblies.

      SST
      PZ4TB-04910-68
      Torque:
      18 N*m  { 178 kgf*cm, 13 ft.*lbf }

    2. Connect the 4 connectors to the glow plug assemblies.

  2. CONNECT ENGINE WIRE


    1. Using a T25 "TORX" socket wrench, connect the engine wire with the screw.

  3. INSTALL NO. 1 ENGINE COVER


    1. A01IQK8E02
      Text in Illustration
      *a Installation Points

      Attach the 4 clips to install the No. 1 engine cover.

      Tech Tips

      When attaching the clips, press the protrusions on the top of the No. 1 engine cover at the clip installation points.

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.