GLOW PLUG CONTROLLER INSTALLATION


  1. INSTALL GLOW PLUG CONTROLLER ASSEMBLY


    1. Using a T25 "TORX" socket wrench, install the glow plug controller assembly with the bolt.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

    2. Connect the 2 connectors.

  2. INSTALL NO. 1 ENGINE COVER


    1. A01IQK8E02
      Text in Illustration
      *a Installation Points

      Attach the 4 clips to install the No. 1 engine cover.

      Tech Tips

      When attaching the clips, press the protrusions on the top of the No. 1 engine cover at the clip installation points.