GLOW PLUG CONTROLLER REMOVAL


  1. REMOVE NO. 1 ENGINE COVER


    1. A01IRDDE01

      Lift the No. 1 engine cover to detach the 4 clips in the order shown in the illustration and remove the No. 1 engine cover.

      Note

      Attempting to disengage both front and rear clips at the same time may cause the No. 1 engine cover to break.

  2. REMOVE GLOW PLUG CONTROLLER ASSEMBLY

    A01IOEB

    1. Disconnect the 2 connectors.

    2. Using a T25 "TORX" socket wrench, remove the bolt and glow plug controller assembly.