Click here

IGNITION SWITCH REMOVAL

Click here
Click here Click here
  1. Click here

    PRECAUTION

    Note:

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).

  2. Click here

    DISCONNECT BATTERY NEGATIVE TERMINAL

    Note:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

  3. Click here

    REMOVE LOWER STEERING COLUMN COVER


    1. A01ISMM

      Detach the 4 claws, release the tilt lever and remove the lower steering column cover.

  4. Click here

    REMOVE IGNITION SWITCH ASSEMBLY


    1. A01ISW0

      for CVT:

      Detach the claw and disconnect the key interlock solenoid wire harness connector from the ignition switch connector.

    2. A01IT7K

      Disconnect the ignition switch connector.

    3. A01IRYC

      Remove the 2 screws and ignition switch.