Click here

IGNITION SWITCH REMOVAL

Click here
Click here Click here
  1. Click here

    DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note:

    • When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).

    • w/ Navigation System (for HDD):

      After the ignition switch is turned off, the HDD navigation system requires approximately a minute to record various types of memory and settings. As a result, after turning the ignition switch off, wait a minute or more before disconnecting the cable from the negative (-) battery terminal.

  2. Click here

    REMOVE LOWER STEERING COLUMN COVER


    1. A01ISMM

      Detach the 4 claws, release the tilt lever and remove the lower steering column cover.

  3. Click here

    REMOVE IGNITION SWITCH ASSEMBLY


    1. A01IT7K

      Disconnect the ignition switch connector.

    2. A01IRYC

      Remove the 2 screws and ignition switch.