IGNITION SWITCH INSTALLATION


  1. INSTALL IGNITION SWITCH ASSEMBLY


    1. A01IRYC

      Install the ignition switch with the 2 screws.

    2. A01IT7K

      Connect the ignition switch connector.

    3. A01ISW0

      Attach the claw to connect the key interlock solenoid wire harness connector to the ignition switch connector.

  2. INSTALL LOWER STEERING COLUMN COVER


    1. A01ISMM

      Attach the 4 claws to install the lower steering column cover.

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.