STARTER (for VALEO Made) DISASSEMBLY


  1. REMOVE MAGNET STARTER SWITCH ASSEMBLY


    1. A01ISGJ

      Remove the nut and disconnect the lead wire from terminal C.

    2. A01IQ31

      Using a T20 "TORX" socket wrench, remove the 2 screws holding the magnet starter switch to the starter drive housing.

    3. Remove the magnet starter switch.

    4. A01IUOS

      Remove the return spring.

    5. A01IRRN

      Remove the plate and boot.

    6. A01IN1L

      Remove the rubber seal.

  2. REMOVE STARTER YOKE ASSEMBLY


    1. A01IRUZ

      Remove the 2 bolts.

    2. A01ISPM

      Remove the starter yoke from the starter drive housing.

  3. REMOVE STARTER CLUTCH SUB-ASSEMBLY


    1. A01IUKP

      Remove the starter pinion drive lever with starter drive lever pin from the starter clutch.

    2. Remove the starter pinion drive lever from the starter drive lever pin.

    3. A01IPLP

      Using a screwdriver with the tip taped, remove the starter clutch from the starter yoke.

  4. REMOVE STARTER COMMUTATOR END FRAME ASSEMBLY


    1. A01IPYB

      Remove the starter commutator end frame from the yoke.

  5. REMOVE STARTER BRUSH HOLDER ASSEMBLY


    1. A01INYO

      Remove the starter brush holder from the starter armature.

  6. REMOVE STARTER ARMATURE ASSEMBLY


    1. A01INCZ

      Remove the starter armature from the starter yoke.