OIL PRESSURE SWITCH REMOVAL


  1. REMOVE NO. 1 ENGINE UNDER COVER


    1. A01IR30

      Remove the 6 bolts and 11 clips.

    2. Remove the No. 1 engine under cover.

  2. REMOVE NO. 1 ENGINE COVER


    1. A01IRDDE01

      Lift the No. 1 engine cover to detach the 4 clips in the order shown in the illustration and remove the No. 1 engine cover.

      Note

      Attempting to disengage both front and rear clips at the same time may cause the No. 1 engine cover to break.

  3. REMOVE RADIATOR SUPPORT OPENING COVER


    1. A01IPK0

      Remove the 3 clips.

    2. Detach the 4 hooks and remove the radiator support opening cover.

  4. REMOVE ENGINE OIL PRESSURE SWITCH ASSEMBLY


    1. Disconnect the engine oil pressure switch assembly connector.

    2. A01ISR4

      Using a 24 mm deep socket wrench, remove the engine oil pressure switch assembly.

    3. Remove the gasket.