WATER PUMP REMOVAL


  1. REMOVE GENERATOR ASSEMBLY

    Click here

  2. DRAIN ENGINE COOLANT


    1. Loosen the radiator drain cock plug.

      Tech Tips

      Collect the coolant in a container and dispose of it according to the regulations in your area.

    2. Remove the radiator reservoir cap.

      CAUTION:

      Do not remove the radiator reservoir cap while the engine and radiator are still hot.

      Pressurized, hot engine coolant and steam may be released and cause serious burns.

      A01INZOE01
      Text in Illustration
      *1 Radiator Reservoir Cap *2 Radiator Drain Cock Plug

  3. REMOVE V-RIBBED BELT TENSIONER ASSEMBLY


    1. Rotate the V-ribbed belt tensioner assembly clockwise and remove the 5 mm hexagon wrench that was used to secure the V-ribbed belt tensioner assembly when removing the V-ribbed belt.

    2. A01ISDDE01
      Text in Illustration
      *a 3 mm Hexagon Wrench

      Rotate the V-ribbed belt tensioner assembly slightly clockwise and secure it using a 3 mm hexagon wrench as shown in the illustration.

      Tech Tips

      It is difficult to install the V-ribbed belt tensioner assembly when it is fully extended. When reusing the V-ribbed belt tensioner assembly, compress and secure the V-ribbed belt tensioner assembly before removing it.

    3. A01IQFU

      Remove the 2 bolts and V-ribbed belt tensioner assembly from the engine assembly.

  4. REMOVE ENGINE WATER PUMP ASSEMBLY


    1. A01ITJ4

      Remove the 6 bolts and engine water pump assembly from the timing chain cover.

    2. A01IQKE

      Remove the gasket from the timing chain cover.