Click here

EXHAUST PIPE REMOVAL

Click here
Click here Click here
  1. Click here

    REMOVE TAILPIPE ASSEMBLY


    1. A01ISEX

      Remove the 2 bolts and 2 compression springs.

    2. Remove the 2 exhaust pipe supports and tailpipe assembly.

  2. Click here

    REMOVE FRONT FLOOR CENTER BRACE


    1. A01IP00

      Remove the 4 bolts and floor brace.

  3. Click here

    REMOVE NO. 2 ENGINE UNDER COVER


    1. A01IPUX

      Using a clip remover, remove the 4 clips and under cover.

  4. Click here

    REMOVE HEATED OXYGEN SENSOR


    1. A01ITAW

      Disconnect the sensor connector.

    2. Detach the clamp.

    3. Remove the wire harness clamp bracket.

    4. A01IP9RE01

      Using SST, remove the sensor from the front exhaust pipe.

      09224-00010
      Note:

      Do not damage the sensor.

  5. Click here

    REMOVE FRONT EXHAUST PIPE ASSEMBLY


    1. A01IRWB

      Remove the 2 bolts and 2 compression springs.

    2. Remove the 3 exhaust pipe supports and front exhaust pipe assembly.