EXHAUST GAS TEMPERATURE SENSOR (for Sensor 2) REMOVAL


  1. REMOVE NO. 1 ENGINE COVER


    1. A01IRDDE01

      Lift the No. 1 engine cover to detach the 4 clips in the order shown in the illustration and remove the No. 1 engine cover.

      Note

      Attempting to disengage both front and rear clips at the same time may cause the No. 1 engine cover to break.

  2. REMOVE EXHAUST GAS TEMPERATURE SENSOR (for Sensor 2)

    Note

    If the exhaust gas temperature sensor is dropped, replace it with a new one.


    1. A01IOUW

      Disconnect the exhaust gas temperature sensor connector.

    2. Disconnect the sensor harness from the bracket clamp.

    3. Disconnect the sensor harness from the hook on the cylinder head cover side.

    4. A01IQHT

      Using a 14 mm union nut wrench, remove the exhaust gas temperature sensor.