EGR BYPASS VALVE SWITCHING VALVE REMOVAL


  1. REMOVE NO. 1 ENGINE COVER


    1. A01IRDDE01

      Lift the No. 1 engine cover to detach the 4 clips in the order shown in the illustration and remove the No. 1 engine cover.

      Note

      Attempting to disengage both front and rear clips at the same time may cause the No. 1 engine cover to break.

  2. REMOVE EGR BYPASS VALVE SWITCHING VALVE ASSEMBLY


    1. A01IQYEE01
      Text in Illustration
      *a Spring Lock

      Disconnect the EGR bypass valve switching valve assembly connector.


      1. Pull the EGR bypass valve switching valve assembly connector off of the EGR bypass valve switching valve assembly while pushing down the spring lock of the EGR bypass valve switching valve assembly connector.

        Note

        If the EGR bypass valve switching valve assembly connector is disconnected without the spring lock being pushed down, the EGR bypass valve switching valve assembly connector may be damaged.

    2. Disconnect the 2 vacuum hoses.

    3. Detach the claw and remove the EGR bypass valve switching valve assembly.