EGR VALVE INSTALLATION


  1. INSTALL EGR VALVE ASSEMBLY


    1. A01IU74

      Install a new gasket to the EGR cooler assembly as shown in the illustration.

    2. Using a T30H "TORX" socket wrench, install the EGR valve assembly with the 2 bolts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

    3. Install 2 new EGR cooler hoses to the EGR cooler assembly and EGR valve assembly.

    4. Hold SST and tighten the SST bolt as shown in the illustration.

      A01INY4E01
      SST
      09521-24010

      Note

      Do not damage the EGR cooler hose.

    5. Remove SST from the EGR cooler hose clamp.

    6. Install the grommet to the EGR cooler assembly.

  2. INSTALL EGR COOLER ASSEMBLY WITH EGR VALVE ASSEMBLY

    Click here