DIFFERENTIAL PRESSURE SENSOR INSTALLATION


  1. INSTALL DIFFERENTIAL PRESSURE SENSOR


    1. Install the 2 No. 1 vacuum transmitting hoses to the differential pressure sensor.

    2. Connect the 2 No. 1 vacuum transmitting hoses to the exhaust manifold converter sub-assembly.

    3. Using a T20 "TORX" socket wrench, install the differential pressure sensor with the screw.

      Torque:
      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

    4. Connect the differential pressure sensor connector and slide the white-colored lock to engage it securely.

  2. INSTALL NO. 1 ENGINE COVER


    1. A01IQK8E02
      Text in Illustration
      *a Installation Points

      Attach the 4 clips to install the No. 1 engine cover.

      Tech Tips

      When attaching the clips, press the protrusions on the top of the No. 1 engine cover at the clip installation points.

  3. PERFORM INITIALIZATION


    1. Perform differential pressure learning value reset Click here.