DIFFERENTIAL PRESSURE SENSOR REMOVAL


  1. REMOVE NO. 1 ENGINE COVER


    1. A01IRDDE01

      Lift the No. 1 engine cover to detach the 4 clips in the order shown in the illustration and remove the No. 1 engine cover.

      Note

      Attempting to disengage both front and rear clips at the same time may cause the No. 1 engine cover to break.

  2. REMOVE DIFFERENTIAL PRESSURE SENSOR


    1. A01INFFE01
      Text in Illustration
      *a White-colored Lock
      *b Slide
      *c Push

      Slide the white-colored lock of the differential pressure sensor connector as shown in the illustration to release it and disconnect the differential pressure sensor connector.

    2. A01IQLX

      Using a T20 "TORX" socket wrench, remove the screw and differential pressure sensor.

    3. Disconnect the 2 No. 1 vacuum transmitting hoses.

    4. Remove the 2 No. 1 vacuum transmitting hoses from the differential pressure sensor.