Click here

DIFFERENTIAL PRESSURE SENSOR REMOVAL

Click here
Click here Click here
  1. Click here

    REMOVE NO. 1 ENGINE COVER


    1. A01IRDDE01

      Lift the No. 1 engine cover to detach the 4 clips in the order shown in the illustration and remove the No. 1 engine cover.

      Note:

      Attempting to disengage both front and rear clips at the same time may cause the No. 1 engine cover to break.

  2. Click here

    REMOVE DIFFERENTIAL PRESSURE SENSOR


    1. A01IRXV

      Disconnect the differential pressure sensor connector and detach the clamp.

    2. Disconnect the No. 1 vacuum transmitting hose.

    3. A01IP7O

      Detach the claw while sliding the differential pressure sensor to remove the differential pressure sensor from the bracket clamp.