VACUUM REGULATING VALVE REMOVAL


  1. REMOVE COWL TOP VENTILATOR LOUVER

    Click here

  2. REMOVE NO. 1 ENGINE COVER


    1. A01INMI

      Hold the rear of the No. 1 engine cover and slowly raise it to detach the clip on the rear of the No. 1 engine cover. Continue to raise the No. 1 engine cover to detach the 3 clips on the front and side of the No. 1 engine cover and remove the No. 1 engine cover.

      Note

      Attempting to disengage both front and rear clips at the same time may cause the No. 1 engine cover to break.

  3. REMOVE VACUUM REGULATING VALVE ASSEMBLY


    1. Disconnect the vacuum regulating valve connector.

    2. A01IQN9

      Disconnect the 2 vacuum hoses.

    3. Remove the 2 bolts and vacuum regulating valve.