Click here

VACUUM REGULATING VALVE REMOVAL

Click here
Click here Click here
  1. Click here

    REMOVE COWL TOP VENTILATOR LOUVER

    (Click here)

  2. Click here

    REMOVE NO. 1 ENGINE COVER


    1. A01INMI

      Hold the rear of the cover and slowly raise it to detach the clip on the rear of the cover. Continue to raise the cover to detach the 3 clips on the front and side of the cover and remove the cover.

      Note:

      Attempting to disengage both front and rear clips at the same time may cause the cover to break.

  3. Click here

    REMOVE VACUUM REGULATING VALVE ASSEMBLY


    1. Disconnect the vacuum regulating valve connector.

    2. A01IQN9

      Disconnect the 2 vacuum hoses.

    3. Remove the 2 bolts and vacuum regulating valve.