Click here

PCV VALVE INSTALLATION

Click here
Click here Click here
  1. Click here

    INSTALL VENTILATION VALVE SUB-ASSEMBLY


    1. A01IN8VE09

      Apply adhesive to 2 or 3 threads of the ventilation valve.

      Adhesive
      Toyota genuine adhesive 1324, three bond 1324 or equivalent
      Table 1. Text in Illustration
      *1 Adhesive
    2. A01INC9

      Using a 22 mm ball joint lock nut wrench, install the ventilation valve.

      20 N*m 204 kgf*cm 15 ft.*lbf
      Note:

      Use the formula to calculate special torque values for situations where ball joint lock nut wrench is combined with a torque wrench (Click here).

  2. Click here

    INSTALL INTAKE MANIFOLD


    1. Install the intake manifold (Click here).