Click here

EXHAUST GAS TEMPERATURE SENSOR REMOVAL

Click here
Click here Click here
  1. Click here

    REMOVE ENGINE ASSEMBLY

    (Click here)

  2. Click here

    REMOVE NO. 1 MANIFOLD CONVERTER INSULATOR


    1. A01IO22

      Remove the 5 bolts and No. 1 manifold converter insulator.

  3. Click here

    REMOVE MANIFOLD STAY


    1. A01IUEH

      Remove the bolt, nut and manifold stay.

  4. Click here

    REMOVE NO. 2 MANIFOLD STAY


    1. A01IQ6M

      Remove the 3 bolts and No. 2 manifold stay.

  5. Click here

    REMOVE NO. 2 EXHAUST MANIFOLD STAY


    1. A01IUQ6

      Remove the 2 bolts, nut and No. 2 exhaust manifold stay.

  6. Click here

    REMOVE EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY


    1. A01IRLJ

      Disconnect the 2 connectors.

    2. A01IQ9Q

      Remove the 3 nuts, exhaust manifold converter and gasket.

  7. Click here

    REMOVE EXHAUST GAS TEMPERATURE SENSOR (for Upper Side)

    Note:

    If the sensor is dropped, replace it with a new one.


    1. A01IUQ4

      Detach the sensor connector clamp.

    2. Using a 14 mm union nut wrench, loosen the union nut.

    3. Remove the nut, clamp and sensor.

  8. Click here

    REMOVE EXHAUST GAS TEMPERATURE SENSOR (for Lower Side)

    Note:

    If the sensor is dropped, replace it with a new one.


    1. A01ISWW

      Detach the sensor connector clamp.

    2. Using a 14 mm union nut wrench, remove the sensor.