VACUUM REGULATING VALVE REMOVAL


  1. REMOVE COWL TOP VENTILATOR LOUVER

    Click here

  2. REMOVE NO. 1 ENGINE COVER


    1. A01INMI

      Hold the rear of the No. 1 engine cover and slowly raise it to detach the clip on the rear of the No. 1 engine cover. Continue to raise the No. 1 engine cover to detach the 3 clips on the front and side of the No. 1 engine cover and remove the No. 1 engine cover.

      Note

      Attempting to disengage both front and rear clips at the same time may cause the cover to break.

  3. REMOVE VACUUM REGULATING VALVE ASSEMBLY


    1. Disconnect the vacuum regulating valve connector.

    2. A01IQN9

      Disconnect the 2 vacuum hoses.

    3. Remove the 2 bolts and vacuum regulating valve.