Click here

EGR BYPASS VALVE SWITCHING VALVE REMOVAL

Click here
Click here Click here
  1. Click here

    REMOVE COWL TOP VENTILATOR LOUVER

    (Click here)

  2. Click here

    REMOVE NO. 1 ENGINE COVER


    1. A01INMI

      Hold the rear of the No. 1 engine cover and slowly raise it to detach the clip on the rear of the No. 1 engine cover. Continue to raise the No. 1 engine cover to detach the 3 clips on the front and side of the No. 1 engine cover and remove the No. 1 engine cover.

      Note:

      Attempting to disengage both front and rear clips at the same time may cause the cover to break.

  3. Click here

    REMOVE NO. 1 VACUUM SWITCHING VALVE ASSEMBLY


    1. A01ITBIE01

      Pinch the clip as shown in the illustration, and pull out the VSV connector.

      Table 1. Text in Illustration
      *a Pinch
    2. A01IQO4

      Disconnect the 2 vacuum hoses.

    3. Using a 4 mm hexagon socket wrench, remove the 2 bolts and VSV.