FUEL SENDER GAUGE ASSEMBLY REMOVAL

Note

Do not try to remove the nylon tube as it is welded to the fuel suction with pump and gauge tube assembly Click here.


  1. REMOVE FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY

    Click here

  2. REMOVE FUEL SENDER GAUGE ASSEMBLY


    1. A01INV5

      Disconnect the fuel sender gauge assembly connector.

    2. Detach the wire harness clamp.

      Note

      Do not damage the wire harness.

    3. Release the lock as shown in the illustration and slide the fuel sender gauge assembly to remove it.