FUEL PRESSURE REGULATOR INSTALLATION


  1. INSTALL FUEL PRESSURE REGULATOR ASSEMBLY


    1. A01IO9IE01
      Text in Illustration
      *1 New O-Ring

      Apply gasoline to 2 new O-rings and install them to the fuel pressure regulator.

    2. A01IMXR

      Install the fuel pressure regulator.

  2. INSTALL FUEL PUMP


    1. A01ITXE

      Connect the fuel pump harness connector.

    2. A01INRUE02
      Text in Illustration
      *1 Fuel Pump Spacer

      Install the fuel pump spacer to the fuel pump.

    3. Apply gasoline to a new O-ring and install the O-ring to the fuel pump.

      Text in Illustration
      *2 New O-Ring
    4. A01IUPX

      Attach the 5 claws to the holes to install the fuel pump.

      Note


      • Do not remove the suction filter.

      • Do not use either the fuel pump or the suction filter if the suction filter is removed from the fuel pump.

    5. A01IO1V

      Attach the 2 claws to the holes to install the No. 1 fuel suction support.

    6. A01IRO4

      Attach the 2 claws of the fuel suction support and install the fuel filter and fuel pump onto the fuel sub-tank.

    7. A01INYI

      Align the groove of the fuel pump filter hose with the cutout of the fuel sub-tank and install the hose.

      Note

      Do not apply excessive force to the fuel tube or the suction support.

  3. INSTALL FUEL SENDER GAUGE ASSEMBLY


    1. A01IOQD

      Install the fuel sender gauge by sliding it downward.

    2. A01INT5

      Connect the 3 harness clamps.

    3. Install the harness protector.

      Note

      Do not damage the wire harness.

    4. Connect the connector of the fuel sender gauge.

  4. INSTALL FUEL SUCTION WITH PUMP ASSEMBLY


    1. Install the fuel suction with pump Click here.