FUEL SENDER GAUGE ASSEMBLY INSPECTION


  1. INSPECT FUEL SENDER GAUGE ASSEMBLY


    1. A01IORME01
      Text in Illustration
      *a

      Component without harness connected

      (Fuel Sender Gauge Assembly)

      Check that the float moves smoothly between F and E.

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      2 - 3

      Float position is F

      (upper)

      		 13.5 to 16.5 Ω

      Float position is E

      (lower)

      		 405.5 to 414.5 Ω

      If the result is not as specified, replace the fuel sender gauge assembly.