FUEL SENDER GAUGE ASSEMBLY INSPECTION


  1. INSPECT FUEL SENDER GAUGE ASSEMBLY


    1. A01IRCNE01
      Text in Illustration
      *1

      Front view of wire harness connector

      (to Fuel Sender Gauge)

      Check that the float moves smoothly between F and E.

    2. Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      2 - 3 Float Level F 12.0 to 18.0 Ω
      Float Level Between E and F 15.0 to 410.0 Ω (Gradually changes)
      Float Level E 405.0 to 415.0 Ω

      If the result is not as specified, replace the fuel sender gauge assembly.